Edit Anything

Professional text and hex editing
with Binary Templates technology.






010 Editor - Text/Hex Editor Homepage

     

The Mini Map is a diagram showing the overview of a file, displayed just to the left of the vertical scroll bar in the Text Editor (shown above left) and the Hex Editor (shown above right). The Mini Map can also be viewed in the Visualize tab. Hide or show the Mini Map by clicking 'View > Mini Map > Show Mini Map' or by placing the mouse over the left-hand side of the Mini Map until the mouse cursor turns into a left-right arrow and then clicking and dragging to the right or left. Options for the Mini Map can be accessed by right-clicking on the Mini Map or by using 'View > Mini Map > Mini Map Options...'. Note that the options and size of the Mini Map are stored in the current Edit As and changing or resizing one Mini Map will change all Mini Maps that share that Edit As. Colors for different aspects of the Mini Map can be controlled with the Theme/Color Options dialog.


Text Mini Map

The Mini Map for text files displays a zoomed out view of each line of the file. All the colors from the regular editor are shown including the selection, Syntax Highlighting, Find results, Compare results, etc. By default the Mini Map is narrow and only shows the first part of each line but the Mini Map can be widened by placing the mouse cursor over the left side of the Mini Map until the cursor turns into a left-right arrow and then clicking and dragging to the left. The zoom factor and position of the Mini Map can be controlled with the Mini Map options.


Hex Mini Map

When editing hex files the Mini Map on the right side of the editor shows the bytes of the file represented as colors. Each pixel of the Mini Map corresponds to a byte in the file being edited and a number of different algorithms exist to map byte values to colors. By default the Mini Map shows 16 bytes per line but this can be adjusted using the Mini Map options. Use the options dialog to change the zoom factor or adjust which coloring algorithm is used.

     

The default coloring algorithm takes the color of each byte obtained from the Template results, Find results, Compare results, etc. and then modifies the color according the value of each byte. Byte values closer to 0 darken the color, bytes values closer to 255 lighten the color, and byte values of 128 leave the color the same (see above left). To see the file without lightening or darkening the color, access the options dialog and set the Contrast to 0 (see above right). The bytes of the line the cursor is on in the Hex Editor are highlighted unless a selection is made in the editor. A number of different Colorize options are also available in the options dialog.


Scrolling the Mini Map

The Mini Map automatically scrolls when the vertical scroll bar is used in the editor or when the cursor moves to a new position. Placing the mouse over the Mini Map shows a highlighted rectangle which indicates the section of the Mini Map that is currently visible in the Text Editor or Hex Editor. Clicking on this highlighted rectangle and dragging up or down scrolls the editor and Mini Map similar to how a regular scroll bar works.

Single-clicking on a line in the Mini Map which is not in the highlighted rectangle will center the editor on the clicked line. Another way exists to scroll the Mini Map by clicking on a line not in the highlighted rectangle and then holding the mouse down and moving up or down. This technique starts a special velocity scroll mode where the editor will scroll faster up as the mouse is moved up or faster down as the mouse is moved down. Velocity scrolling is useful when scrolling through large files.


Mini Map Options

Access the Mini Map Options dialog by clicking 'View > Mini Map > Mini Map Options...' or by right-clicking on the Mini Map. When the dialog is accessed by right-clicking note that the dialog is drawn without a title bar and clicking with the mouse outside the dialog will close the dialog and accept any changes. All options for the Mini Map are stored with the current Edit As and changing an option for one file will change all files that use that Edit As.

When editing text files the above dialog is displayed. Move the Mini Map to the left side of the Text Editor or Hex Editor by clicking the Mini Map Position drop-down and selecting Left Side. The Mini Map can be hidden by clicking the Hide button and if the Mini Map is already hidden when the dialog is displayed the button will be changed to a Show button instead. Clicking the Reset button changes all Mini Map options back to their defaults. The Mini Map can also be zoomed by dragging the Zoom slider and the zoom value is the height of each line in the Mini Map.

A different options dialog with more coloring options is displayed when editing hex files. The Mini Map Position, Hide, Reset and Zoom are all identical to the text Mini Map options above. The Highlight Structs toggle is discussed below in the Highlighting Structs section. The default coloring scheme for the Mini Map takes the color of each byte from the editor and then lightens it or darkens it depending upon the byte value. Byte values closer to 0 darker the color, byte values closer to 255 lighten the color and byte values of 128 do not modify the color. The amount of darkening or lightening can be adjusted by dragging the Contrast slider and setting a value of 0 disables any lightening or darkening of the bytes (see the Hex Mini Map above for a diagram). Dragging the Brightness slider right or left lightens or darkens the whole Mini Map.

Clicking the Colorize toggle enables other coloring modes that ignore any colors from the editor such as the Template results and applies colors based on the value of each byte. Note that the Contrast slider is not used when Colorize is enabled. The following Colorize choices are currently available:

  • ASCII Sections - Colors bytes according to the above color map. Byte values between 0 and 32 are colored purple and byte values 128 and above are colored green.
  • Rainbow - Uses a rainbow coloring scheme ranging from 0 being colored red to 255 being colored purple.
  • Heat - Colors range from red up to yellow.
  • Ocean - Colors range from dark blue up to light blue.
  • Gray - Colors range from black to white.
  • Custom - Allows picking two colors for the starting and ending colors. Bytes with value zero are displayed as the first color and bytes with value 255 are displayed as the second color and all other byte values are blended between the two colors.

The number of bytes per line of the Mini Map is shown in the Bytes Per Line field. Enter a new value in the field and press the Enter key to apply the value. If Auto Snap is enabled and the Mini Map is resized then the Bytes Per Line will automatically be set to the greatest multiple of Auto Snap that can be set for the width. The Mini Map can be resized by placing the cursor over the left side of the Mini Map until the cursor turns into a left-right arrow and then clicking and dragging with the mouse.

Clicking the OK button accepts any changes and closes the dialog but clicking the Cancel button restores the settings when the options dialog was first displayed.


Highlighting Structs

When a Template has been run and the mouse cursor is placed over a byte in the Hex Editor belonging to a struct defined in the Template, all the bytes belonging to that struct are highlighted in the Mini Map. To turn off this highlighting in the Mini Map, uncheck the Highlight Structs toggle in the Mini Map Options dialog above. See Struct Outlining for more information.


Visualize

     

An alternate way of viewing the Mini Map is to use the Visualize tab in the Inspector group of tabs. This tab shows the same information as the regular Mini Map but the tab can be resized and undocked for different types of visualizations. Currently the only way to access the options for the Visualize panel is to right-click on the panel. Note that the options for the Visualize panel are stored separate from the current Edit As so the Visualize panel can be configured to display data differently than the main editor Mini Map.


This is the manual for 010 Editor, a professional hex editor and text editor. Use 010 Editor to edit the individual bytes of any binary file, hard drive, or process on your machine. 010 Editor contains a whole host of powerful analysis and editing tools, plus Binary Templates technology that allows any binary format to be understood.





Newsletter - Receive special offers, tips, tricks and news. Join now



010 Editor v15.0 is here!
What's new?


Navigation


Products

010 Editor














E-mail: info@sweetscape.com